über 25.000 Artikel auf Lager Beratender Partner Umfangreiche Produktkenntnisse
Zur Startseite wechseln

SPX APV Delta DA3

Applying the SPX APV Delta DA3

In the field of so-called Mix-proof valves, which ensure a strict separation of two hostile products, SPX APV has a very complete program; SPX APV mixproof valve type Delta DA3. This is a fully balanced (pressure blow-solid) and switching loss-arm (<0.001 ltr / shifting) valve with integrated auxiliary cylinders for the individual lights of the upper or lower valve plate during the CIP process in order to optimally clean the sealing surface of the valve disk. Moreover it has an internal surface roughness Ra = <0,8μm.

The shut-off valve is provided with a standard coil connection for cleaning the leak detection port. Available in various housing configurations. The valve can be supplied with an APV Control Unit which has connections for the PLC system including: Direct Wired, ASI-Bus, Profibus or DeviceNet. The actuator is completely maintenance free and has a warranty of five years. Moreover, the valve is made for a "Normally Closed" application.

Filter
Artikelnr. Beschreibung Nennweite Lager
33636188AP
SPX APV Delta DA3
Double seat valve Delta DA3 DA31 (24) 1.5" EPDM 316L
1,5" (ø 38,1 mm)
Artikelnr. Beschreibung Abmessung Elastomer Lager
33636910AP
Ersatzteil Delta DA32-80 O-Ring 101.27x2.62 NBR
33636913AP
Ersatzteil Delta DA34-T Quadring 2" pos.22
33636915AP
Ersatzteil Delta DA34-T O-Ring 2" (82.22x2.62mm)
33636904AP
Ersatzteil Delta DA3 Ventil insert 4"/DN100
33630018AP
Servicekit Doppelsitzventil DA3 NW150-200 EPDM
33620067AP
Dichtung kit Doppelsitzventil DA3-Große III DN125+150 HNBR
APH207311
Werkzeug Assembly tool DA3-92 middle seal
33636912AP
Ersatzteil Delta DA3 Federzylinder Pos.8 DN40 / DN65 - 1.5" / 2.5"
33630901AP
Ersatzteil Delta DA3 Ventil Gleitring EPDM Pos.38
33636901AP
Ersatzteil Delta DA3 Absperr Schraube 1.5"T-4"T Komplett
33636909AP
Ersatzteil Delta DA32-80 Kolben Dichtung PKK1-102
33636908AP
Ersatzteil Delta DA32-80 Gleit band 3.9mm
Material
 
Product in contact with parts AISI 316L /1.4404
ID finish Ra 0,8 μm
Other stainless steel parts AISI 304 / 1.4301
Standard Seals EPDM (PTFE)
Max. operating pressure 10 bar (5 bar against seal)
Sizes EN10357 serie A and serie D (OD BS4825)
Optional seals HNBR or FPM (Viton)
Valve 2-piece stainless steel
Driving
 
Required air pressure 6 to 8 bar
Spring closing / Spring opened Spring closed
With integrated lift drive yes
Operating
 
Closed stand mixproof valve n.a.
Valve seal Double seal
Visual leak detection Under valve shaft
Cleanable leak room Separate CIP connection
Upper valve cleanable No
Under valve cleanable No
Leakproof shifting Yes
Balanced valve Yes , under and below

Maintenance

 
House connection Welded
Revision / disassembly In line upper demountable
Special tools necessary Yes for the seals