SPX APV Delta DKR
Applying the SPX APV Delta DKR
The SPX APV Delta DKR ball valve is a shut-off valve provided with two valve seats and a drainage cavity for detecting a leaking seat inside the ball valve. A valve is fully EHEDG tested and all the materials are made of FDA certified material. The leak chamber has even to be sterilized with steam. Therefore the DKR has a full bore and is suitable for pigging systems. The DKR can be supplied as:
- DKRT Ball valve: Tank Outlet
- DKRH ball valve: High compression for example butter or mayonnaise
- Piggable to combine with a product recovery system (Pigging)
The valve is provided with a maintenance free pneumatic actuator and may be provided with an APV Control Unit.
Artikelnr. | Beschreibung | Nennweite | Anschluss | Betriebs | Dichtung | Lager |
---|---|---|---|---|---|---|
23138004AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
1", Handgriff, PTFE/EPDM
|
1" (ø 25,4 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
23138005AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
DN25, Handgriff, PTFE/EPDM
|
DN25 (ø 29 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
23138008AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
1.5", Handgriff, PTFE/EPDM
|
1,5" (ø 38,1 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
23138009AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
DN40, Handgriff, PTFE/EPDM
|
DN40 (ø 41 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
23138010AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
2", Handgriff, PTFE/EPDM
|
2" (ø 50,8 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
23138011AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
DN50, Handgriff, PTFE/EPDM
|
DN50 (ø 53 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
23138012AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
2.5", Handgriff, PTFE/EPDM
|
2,5" (ø 63,5 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
23138013AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
DN65, Handgriff, PTFE/EPDM
|
DN65 (ø 70 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
23138014AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
3", Handgriff, PTFE/EPDM
|
3" (ø 76,1 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
23138015AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
DN80, Handgriff, PTFE/EPDM
|
DN80 (ø 85 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
23138016AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
4", Handgriff, PTFE/EPDM
|
4" (ø 101,6 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
23138017AP
|
Kugelhahn Delta DKR schweiß/schweiß 316L
DN100, Handgriff, PTFE/EPDM
|
DN100 (ø 104 mm) | Schweiß / Schweiß | handbetätigt | EPDM |
|
Artikelnr. | Beschreibung | Abmessung | Elastomer | Lager |
---|---|---|---|---|
23146008AP
|
Kugelhahn Delta DKR Ersatzteilatz
1.5", PTFE/FPM (Viton)
|
|
|
|
23938501AP
|
Ersatzteil für DKR drainage DN25-65
|
|
|
|
APH77340
|
Teil Delta DKR
Ball seal
|
|
|
|
23146011AP
|
Kugelhahn Delta DKR Ersatzteilatz
DN50, PTFE/FPM (Viton)
|
|
|
|
23156010AP
|
Servicekit Kugelhahn DKR
2"/NW50 MVQ (Silikon)
|
|
|
|
APH125656
|
Teil Delta DKR
O-ring 28-3 70-75 Shore A
|
|
|
|
23146014AP
|
Servicekit Kugelhahn DKR
3" FPM(Viton)
|
|
|
|
23136014AP
|
Servicekit Kugelhahn DKR
3" EPDM
|
|
|
|
23126015AP
|
Kugelhahn Delta DKR Ersatzteilatz
DN80, PTFE/HNBR
|
|
|
|
23146013AP
|
Kugelhahn Delta DKR Ersatzteilatz
DN65, PTFE/FPM (Viton)
|
|
|
|
23126005AP
|
Kugelhahn Delta DKR Ersatzteilatz
DN25, PTFE/HNBR
|
|
|
|
23136008AP
|
Kugelhahn Delta DKR Ersatzteilatz
1.5", PTFE/EPDM
|
|
|
|
Materials |
|
Parts in contact with product | 1.4404 / AISI 316L |
Other parts | 1.4301 / AISI 304 |
Ball seal | PTFE |
Flange seal | EPDM |
Seal options | HNBR, FPM, VMQ (Silicon) |
Housing seal | EPDM |
Seal options | HNBR, FPM |
Technical data |
|
Sizes DKR | DN25 to DN150 / 1” to 4” OD |
DKRT | DN50, DN80 and DN100 |
DKRH | DN50 and DN80 |
Max. Operating pressure DKR | 10 bar |
DKRT | 10 bar |
DKRH | 100 bar |
Required pressure | 6 to 10 bar |