SPX APV Delta SW4
Applying the SPX APV Delta SW4
The SPX APV Valve Type Delta SW4 is the successor to the larger sizes of the Delta S2. APV Valve Delta SW4, pneumatically operated air opening/closing spring (by turning the cylinder spring function can be easily changed) in sizes DN25 - DN150 and 1 "- 4". If desired, also manual available. This Single Seat Valve is standard equipped with welding ends, optionally available with various process connections.
The valve can be used as:
- NC (Normally Closed) Drive feather falling
- NO (Normally Open) Drive elevating spring
The Delta SW4 has a maintenance-free control head and is equipped with a CU41 Direct Connect Control Unit. The control unit displays the position by LED’s of the tappet. The control unit can be supplied in various versions:
- Direct Connect
- Profibus
- DeviceNet
- AS-Interface
The Delta SW4 can be used as a valve in the following options:
- Manual operated
- Tank Outlet
- Long stroke verison
- DPF (with steam room)
- R4 (with control cone)
| Artikelnr. | Beschreibung | Lager |
|---|---|---|
|
33126112AP
|
Change over valve Delta
Type SW41
2.5" (Ø63.5), HNBR 316L
Ra 0,8 m, PO / NC
3.1 Zertifikat: Nein |
|
| Artikelnr. | Beschreibung | Abmessung | Elastomer | Lager |
|---|---|---|---|---|
|
33150572AP
|
Einsitzventil
Typ Delta SWE41-42
ersatzteil set 2.5" VMQ
|
|
|
|
|
33120121AP
|
Servicekit Einsitzventil S2
NW10 HNBR
|
|
|
|
|
33120903AP
|
Servicekit Einsitzventil
Typ Delta SWE45/48
DN80 HNBR
|
|
|
|
|
33140913AP
|
Ersatzteil Einsitzventil SW4
Dichtung FPM 2.5"
H170668
|
|
|
|
|
33130119AP
|
Servicekit Einsitzventil
Gehäuse LL-LT-TT-TL
5"/NW125 EPDM
|
|
|
|
|
APH175812
|
Ersatzteil Einsitzventil
Dichtungsatz SW41+42/SWE43+44
1.5" HNBR
|
|
|
|
|
33150312AP
|
Ersatzteil Delta
SW41/42 SWE43/44
Dichtung kit 2.5" MVQ
|
|
|
|
|
33100911AP
|
Ersatzteil SWE41
Untere Gehäuse 2.5" 1-port 3A-
|
|
|
|
|
33150308AP
|
Ersatzteil Delta
SW41/42 SWE43/44
Dichtung kit DN40 + 1.5" MVQ
|
|
|
|
|
APH179469
|
Werkzeug
Assembly tool SW4-65 flat 74,2 DIA
|
|
|
|
|
33136922AP
|
Ersatzteil Einsitzventil SW43
Welle 1"
|
|
|
|
|
33130116AP
|
Ersatzteil set Delta SW4
4" EPDM
|
|
|
|
Material |
|
| Product contact parts | 316L / 1.4404 |
| ID finish | Ra 1,6 μm |
| Other stainless steel parts | 304 / 1.4301 |
| Standard seals | EPDM |
| Max. operating pressure | 10 bar |
| Sizes | EN-10357-A en EN-10357-D (BS4825) |
| Seal options | MVQ, (Silicone), HNBR |
| Valve | One-piece stainless steel |
Driving |
|
| Required air pressure | 6 to 8 bar |
| Spring closed or spring open | Choice at the installation |
| Integrated lift | n.a. |
Mode of operation |
|
| Closed stand switching | Downstairs |
| Valve seal | One-piece seal |
| Visual leak detection | n.a. |
| Cleanable leak room | n.a. |
| Cleanable upper valve | n.a. |
| Cleanable lower valve | n.a. |
| Leak proof switching | n.a. |
| balanced valves | n.a. |
Maintenance |
|
| House link | Clamp |
| Revision / disassembly | In line demountable upwards (only as stop valve) |
| Special tools necessary | Yes, fort the seals |