Bends for food applications DIN sizes

Using Tube Fittings from Q-Fitt

Pipes are an important part of your production process and is getting the right attention lately. As a result of the application, the corrosion requirements and regulatory guidelines, is applicable in your situation. A good specification is necessary to make sure your chooses will actually be delivered.

SKS fully supports your process with the Tube fittings Q-Fitt program

In the huge and diverse range of welding fittings for sanitary pipelines available worldwide, SKS has made a selection and therefore offers the brand Q-Fitt. With this brand, our range has been highly streamlined.

As your specialist in stainless steel tube components, is is our duty to fulfill this role. As a stockholder and supplier to the process industries, we benefit from this slimming.

Tube fittings

The tube fittings from Q-Fitt are not only manufactured to the standards, but are also marked with the necessary information. As a result, the required traceability is guaranteed and there are no difficult and costly certificates procedure necessary. In combination with the underlying system of SKS, they meet the requirements according to EN / 1935/2004. Summarizing adjusts the Q-Fitt range in multiple ways in your application:

Guarantee of Quality
Risk cover for legal guidelines
Guarantee traceability
Always current specification to your suppliers
Appropriate and consistent piping
Easily controllable from the receipt

Q-Fitt is available in sizes from the relevant standards. The specific data on tolerances, radius and mounting dimensions are of course available on request. Any changes to the norms and standard, we will of course apply the Q-Fitt specification. This brand Q-Fitt will always meet all current guidelines.

Read more Read less

Datasheet

Tube	EN-10357 BC / EN-10217-7 W2Ab Dimensions according to EN-10357 series A, B and D: The Q-Fitt tubes has a Ra value < 0.8 micro (Also on the weld). is annealed and full bath pickled. In addition, the tube is supplied with endcaps as standard
Bend	DIN 11852 BS (short) and BL (long), ISO 2851 (long) and BS 4825-2 (long)
Tee	DIN 11852 TS (short) and TK (long), ISO 2851 (long) and BS 4825-2 (long and short)
Reducer	DIN 11852 RK (con.) and RE (exc.), ISO 2851 (con./exc.) and BS 4825-2 (con./exc.)
Unions	DIN 11853, DIN 11851, S.K.S. execution, DIN 32676 and SMS 1145.

Articlenr.	Description	Dimensions	Degrees	Welding ends	Material type
04034002QF	Bend Q-Fitt BS-90° 19x1,5 304 mat SKS's choice Q-Fitt welding bend 90° Short welding ends (BS-90) DN15 (19,00 x 1,50) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm Alternative products	DN15 (ø 19 mm)	90°	Short (BS)	304 (L)
04034002R2	Bend DIN11852-BS BA3 19x1,5 304 SB Welding bend DIN11852 BS BC SB 90° R=35 DN15 (19x1.5) 1.4307 (304L) Annealed / bright Alternative products	DN15 (ø 19 mm)	90°	Short (BS)	304 (L)
04034003QF	Bend Q-Fitt BS-90° 23x1,5 304 mat SKS's choice Q-Fitt welding bend 90° Short welding ends (BS-90) DN20 (23,00 x 1,50) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm Alternative products	DN20 (ø 23 mm)	90°	Short (BS)	304 (L)
04034005QF	Bend Q-Fitt BS-90° 29x1,5 304 mat SKS's choice Q-Fitt welding bend 90° Short welding ends (BS-90) DN25 (29,00 x 1,50) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm Alternative products	DN25 (ø 29 mm)	90°	Short (BS)	304 (L)
04034005R2	Bend DIN11852-BS BA3 29x1,5 304 SB Welding bend DIN11852 BS BC SB 90° R=50 DN25 (29x1.5) 1.4307 (304L) Annealed / bright Alternative products	DN25 (ø 29 mm)	90°	Short (BS)	304 (L)
04034007QF	Bend Q-Fitt BS-90° 35x1,5 304 mat SKS's choice Q-Fitt welding bend 90° Short welding ends (BS-90) DN32 (35,00 x 1,50) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm Alternative products	DN32 (ø 35 mm)	90°	Short (BS)	304 (L)
04034009QF	Bend Q-Fitt BS-90° 41x1,5 304 mat SKS's choice Q-Fitt welding bend 90° Short welding ends (BS-90) DN40 (41,00 x 1,50) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm Alternative products	DN40 (ø 41 mm)	90°	Short (BS)	304 (L)
04034011QF	Bend Q-Fitt BS-90° 53x1,5 304 mat SKS's choice Q-Fitt welding bend 90° Short welding ends (BS-90) DN50 (53,00 x 1,50) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm Alternative products	DN50 (ø 53 mm)	90°	Short (BS)	304 (L)
04034013QF	Bend Q-Fitt BS-90° 70x2 304 mat SKS's choice Q-Fitt welding bend 90° Short welding ends (BS-90) DN65 (70,00 x 2,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm Alternative products	DN65 (ø 70 mm)	90°	Short (BS)	304 (L)
04034015QF	Bend Q-Fitt BS-90° 85x2 304 mat SKS's choice Q-Fitt welding bend 90° Short welding ends (BS-90) DN80 (85,00 x 2,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm Alternative products	DN80 (ø 85 mm)	90°	Short (BS)	304 (L)
04034017QF	Bend Q-Fitt BS-90° 104x2 304 mat SKS's choice Q-Fitt welding bend 90° Short welding ends (BS-90) DN100 (104,00 x 2,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm Alternative products	DN100 (ø 104 mm)	90°	Short (BS)	304 (L)
04034019QF	Bend Q-Fitt BS-90° 129x2 304 mat SKS's choice Q-Fitt welding bend 90° Short welding ends (BS-90) DN125 (129,00 x 2,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm Alternative products	DN125 (ø 129 mm)	90°	Short (BS)	304 (L)