T-pieces for food applications INCH sizes
Using Tube Fittings from Q-Fitt
Pipes are an important part of your production process and is getting the right attention lately. As a result of the application, the corrosion requirements and regulatory guidelines, is applicable in your situation. A good specification is necessary to make sure your chooses will actually be delivered.
SKS fully supports your process with the Tube fittings Q-Fitt program
In the huge and diverse range of welding fittings for sanitary pipelines available worldwide, SKS has made a selection and therefore offers the brand Q-Fitt. With this brand, our range has been highly streamlined.
As your specialist in stainless steel tube components, is is our duty to fulfill this role.
Tube fittings
The tube fittings from Q-Fitt are not only manufactured to the standards, but are also marked with the necessary information. As a result, the required traceability is guaranteed and there are no difficult and costly certificates procedure necessary. In combination with the underlying system of SKS, they meet the requirements according to EN / 1935/2004. Summarizing adjusts the Q-Fitt range in multiple ways in your application:
- Guarantee of Quality
- Risk cover for legal guidelines
- Guarantee traceability
- Always current specification to your suppliers
- Appropriate and consistent piping
- Easily controllable from the receipt
Q-Fitt is available in sizes from the relevant standards. The specific data on tolerances, radius and mounting dimensions are of course available on request. Any changes to the norms and standard, we will of course apply the Q-Fitt specification. This brand Q-Fitt will always meet all current guidelines.
Articlenr. | Description | Type of T-Piece | Dimensions | Dimensions 2 | Material type | Stock |
---|---|---|---|---|---|---|
04134454
|
Welding tee
Welding tee bend
1" (25,40 x 1,25) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Tee bend | 1" (ø 25,4 mm) | 304 (L) |
|
|
04134458
|
Welding tee
Welding tee bend
1,5" (38,10 x 1,50) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Tee bend | 1,5" (ø 38,1 mm) | 304 (L) |
|
|
04134460
|
Welding tee
Welding tee bend
2" (50,80 x 1,50) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Tee bend | 2" (ø 50,8 mm) | 304 (L) |
|
|
04134462
|
Welding tee
Welding tee bend
2,5" (63,50 x 1,50) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Tee bend | 2,5" (ø 63,5 mm) | 304 (L) |
|
|
04134464
|
Welding tee
Welding tee bend
3" (76,10 x 1,50) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Tee bend | 3" (ø 76,1 mm) | 304 (L) |
|
|
04134468
|
Welding tee
Welding tee bend
4" (101,60 x 2,00) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Tee bend | 4" (ø 101,6 mm) | 304 (L) |
|
|
04134479
|
Welding tee
Double Tee Bend
1" (25,40 x 1,25) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Y bend | 1" (ø 25,4 mm) | 304 (L) |
|
|
04134483
|
Welding tee
Double Tee Bend
1,5" (38,10 x 1,50) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Y bend | 1,5" (ø 38,1 mm) | 304 (L) |
|
|
04134485
|
Welding tee
Double Tee Bend
2" (50,80 x 1,50) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Y bend | 2" (ø 50,8 mm) | 304 (L) |
|
|
04134487
|
Welding tee
Double Tee Bend
2,5" (63,50 x 1,50) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Y bend | 2,5" (ø 63,5 mm) | 304 (L) |
|
|
04134489
|
Welding tee
Double Tee Bend
3" (76,10 x 1,50) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Y bend | 3" (ø 76,1 mm) | 304 (L) |
|
|
04134493
|
Welding tee
Double Tee Bend
4" (101,60 x 2,00) 1.4307 (304L)
Outside matt
EN10374-D / DIN11852
|
Welding Y bend | 4" (ø 101,6 mm) | 304 (L) |
|
Tube |
EN-10357 BC / EN-10217-7 W2Ab Dimensions according to EN-10357 series A, B and D: The Q-Fitt tubes has a Ra value < 0.8 micro (Also on the weld). is annealed and full bath pickled. In addition, the tube is supplied with endcaps as standard |
Bend | DIN 11852 BS (short) and BL (long), ISO 2851 (long) and BS 4825-2 (long) |
Tee | DIN 11852 TS (short) and TK (long), ISO 2851 (long) and BS 4825-2 (long and short) |
Reducer | DIN 11852 RK (con.) and RE (exc.), ISO 2851 (con./exc.) and BS 4825-2 (con./exc.) |
Unions | DIN 11853, DIN 11851, SKS execution, DIN 32676 and SMS 1145. |