Reducers for food applications DIN sizes

Using Tube Fittings from Q-Fitt

Pipes are an important part of your production process and is getting the right attention lately. As a result of the application, the corrosion requirements and regulatory guidelines, is applicable in your situation. A good specification is necessary to make sure your chooses will actually be delivered.

SKS fully supports your process with the Tube fittings Q-Fitt program

In the huge and diverse range of welding fittings for sanitary pipelines available worldwide, SKS has made a selection and therefore offers the brand Q-Fitt. With this brand, our range has been highly streamlined.

As your specialist in stainless steel tube components, is is our duty to fulfill this role. As a stockholder and supplier to the process industries, we benefit from this slimming.

Tube fittings

The tube fittings from Q-Fitt are not only manufactured to the standards, but are also marked with the necessary information. As a result, the required traceability is guaranteed and there are no difficult and costly certificates procedure necessary. In combination with the underlying system of SKS, they meet the requirements according to EN / 1935/2004. Summarizing adjusts the Q-Fitt range in multiple ways in your application:

Guarantee of Quality
Risk cover for legal guidelines
Guarantee traceability
Always current specification to your suppliers
Appropriate and consistent piping
Easily controllable from the receipt

Q-Fitt is available in sizes from the relevant standards. The specific data on tolerances, radius and mounting dimensions are of course available on request. Any changes to the norms and standard, we will of course apply the Q-Fitt specification. This brand Q-Fitt will always meet all current guidelines.

Read more Read less

Tube	EN-10357 BC / EN-10217-7 W2Ab Dimensions according to EN-10357 series A, B and D: The Q-Fitt tubes has a Ra value < 0.8 micro (Also on the weld). is annealed and full bath pickled. In addition, the tube is supplied with endcaps as standard
Bend	DIN 11852 BS (short) and BL (long), ISO 2851 (long) and BS 4825-2 (long)
Tee	DIN 11852 TS (short) and TK (long), ISO 2851 (long) and BS 4825-2 (long and short)
Reducer	DIN 11852 RK (con.) and RE (exc.), ISO 2851 (con./exc.) and BS 4825-2 (con./exc.)
Unions	DIN 11853, DIN 11851, SKS execution, DIN 32676 and SMS 1145.

Articlenr.	Description	Dimensions	Dimensions 2	Type of reducer	Material type
11134201QF	Red. 11852 RK con. 19/13 304L mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN15 x 10 (19,00 x 13,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm L=11,00mm	DN15 (ø 19 mm)	DN10 (ø 13)	Concentric (RC)	304 (L)
11134202QF	Red. Q-Fitt RC con. 23/13 304 mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN20 x 10 (23,00 x 13,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm L=18,00mm Alternative products	DN20 (ø 23 mm)	DN10 (ø 13)	Concentric (RC)	304 (L)
11134203QF	Red. Q-Fitt RC con. 23/19 304 mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN20 x 15 (23,00 x 19,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm L=7,00mm Alternative products	DN20 (ø 23 mm)	DN15 (ø 19)	Concentric (RC)	304 (L)
11134204QF	Red. Q-Fitt RC con. 29/13 304 mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN25 x 10 (29,00 x 13,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm L=29,00mm Alternative products	DN25 (ø 29 mm)	DN10 (ø 13)	Concentric (RC)	304 (L)
11134205QF	Red. Q-Fitt RC con. 29/19 304 mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN25 x 15 (29,00 x 19,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm L=18,00mm	DN25 (ø 29 mm)	DN15 (ø 19)	Concentric (RC)	304 (L)
11134206QF	Red. Q-Fitt RC con. 29/23 304 mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN25 x 20 (29,00 x 23,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm L=11,00mm	DN25 (ø 29 mm)	DN20 (ø 23)	Concentric (RC)	304 (L)
11134214QF	Red. Q-Fitt RC con. 35/23 304 mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN32 x 20 (35,00 x 23,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm L=22,00mm Alternative products	DN32 (ø 35 mm)	DN20 (ø 23)	Concentric (RC)	304 (L)
11134215QF	Red. Q-Fitt RC con. 35/29 304 mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN32 x 25 (35,00 x 29,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm L=11,00mm	DN32 (ø 35 mm)	DN25 (ø 29)	Concentric (RC)	304 (L)
11134222QF	Red. Q-Fitt RC con. 41/19 304 mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN40 x 15 (41,00 x 19,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra 0,8 / 0,8 µm L=40,00mm Alternative products	DN40 (ø 41 mm)	DN15 (ø 19)	Concentric (RC)	304 (L)
11134223QF	Red. Q-Fitt RC con. 41/23 304 mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN40 x 20 (41,00 x 23,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm L=33,00mm Alternative products	DN40 (ø 41 mm)	DN20 (ø 23)	Concentric (RC)	304 (L)
11134224QF	Red. Q-Fitt RC con. 41/29 304 mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN40 x 25 (41,00 x 29,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm L=22,00mm	DN40 (ø 41 mm)	DN25 (ø 29)	Concentric (RC)	304 (L)
11134225QF	Red. Q-Fitt RC con. 41/35 304 mat SKS's choice Q-Fitt welding reducer Reducer concentric (RC) DN40 x 32 (41,00 x 35,00) 1.4307 (304L) Annealed, outside matt (BC) EN10374-A / DIN11852 Internal surface Ra ≤ 0,8 / 0,8 µm L=11,00mm	DN40 (ø 41 mm)	DN32 (ø 35)	Concentric (RC)	304 (L)