Klay SAN series
Applying Stainless Steel 2000 Series
The Klay Stainless Steel Pressure Indicator 2000 Series is a pressure and level indicator with a completely stainless steel housing. This indicator is easy to install without test pressure due to the three buttons on the display. Moreover the display shows the pressure in different measurements, process temperature and the mute can be installed from 0 to 25 seconds.
The level transmitters of the Klay 2000-SAN series are available with all industrial process connections such as weld or wire connected. The channels are surrounded by a house with IP class 66 water and dust resistance. Optional ATEX versions are also available.
Articlenr. | Description | Dimensions | Connection | Stock |
---|---|---|---|---|
35136556
|
Pressure transmitter SAN
SAN8000 E DN25 Liner / Nut 316L
|
DN25 (ø 29 mm) | Clamp |
|
35136558
|
Pressure transmitter SAN
SAN8000 F DN25 Liner / Nut 316L
|
DN25 (ø 29 mm) | Liner nut |
|
35136560
|
Pressure transmitter SAN
SAN8000 G DN25 Liner / Nut 316L
|
DN25 (ø 29 mm) | Liner nut |
|
35136561
|
SAN2000 press.transm. 316L
Type 4, DN25 (male/nut 11851)
|
DN25 (ø 29 mm) | Liner nut |
|
35136562
|
SAN2000 press.transm. 316L
Type 1, DN40 (male/nut 11851)
|
DN40 (ø 41 mm) | Liner nut |
|
35136563
|
SAN2000 press.transm. 316L
Type 2, DN40 (male/nut 11851)
|
DN40 (ø 41 mm) | Liner nut |
|
35136564
|
SAN2000 press.transm. 316L
Type 3, DN40 (male/nut 11851)
|
DN40 (ø 41 mm) | Liner nut |
|
35136565
|
SAN2000 press.transm. 316L
Type 4, DN40 (male/nut 11851)
|
DN40 (ø 41 mm) | Liner nut |
|
35136566
|
SAN2000 press.transm. 316L
Type 1, DN50 (male/nut 11851)
|
DN50 (ø 53 mm) | Liner nut |
|
35136567
|
SAN2000 press.transm. 316L
Type 2, DN50 (male/nut 11851)
|
DN50 (ø 53 mm) | Liner nut |
|
35136568
|
SAN2000 press.transm. 316L
Type 3, DN50 (male/nut 11851)
|
DN50 (ø 53 mm) | Liner nut |
|
35136569
|
SAN2000 press.transm. 316L
Type 4, DN50 (male/nut 11851)
|
DN50 (ø 53 mm) | Liner nut |
|
Technical data 2000 Series |
|
Measurement range | 0-0.04 bar tot 0-80 bar |
Signal output | 4-20mA, 2 wire |
Accuracy class | 0.1% |
Power Klay | 13 to 36 VDC |
Electr. connection | PG9 or M20 |
External | 600 Ohm / 24V to 1400 Ohm / 40V |
Protection class | IP 66 |
Process temperature | -20 to 100 °C |
135 °C , 30 minutes | |
Optional 2000 Series |
|
ATEX | |
Vacuum | |
Signal Output Klay | HART protocol |