Inoxpa VeeValve
Applying the Inoxpa Diaphragm VeeValve
The Inoxpa Diaphragm VeeValve is a diaphragm valve which is recommended for standard processes in the food, cosmetics and bio-pharma industries. All membranes are provided with the FDA and USP Class 6 certificates. This membrane valve is perfect for the opening or closing but also serves perfectly for controlling the flow rate. The Veevalve is available with both a manually control or a pneumatic actuator. The valve is equipped with a leak detection and a position indicator. All parts are traceable and the standard connections and Weld or Clamp OD / DIN.
The VeeValve is unique because of its straight through flow path. There is no obstructing hight is the housing and therefore the valve has an extreme high Kv factor.
Product is no longer available.
Articlenr. | Description | Dimension | Elastomer | Stock |
---|---|---|---|---|
20130001VV
|
Servicekit diaphragm valve
Type Veevalve
DN6-10 / 1/4"-5/8" EPDM
|
|
|
|
20163007IN
|
Servicekit diaphragm valve
Type Veevalve
DN32/1.5"/DN40
Diaphragm gasket no.3 PTFE/EPDM
|
|
|
|
20130005VV
|
Servicekit diaphragm valve
Type Veevalve
DN25/1" EPDM
|
|
|
|
20163005IN
|
Servicekit diaphragm valve
Type Veevalve
DN15-25 + 3/4"-1"
Diaphragm gasket no.2 PTFE/EPDM
|
|
|
|
20160113VV
|
Servicekit diaphragm valve
Type Veevalve (Realm)
DN65-80/2.5"-3"
Diaphragm gasket PTFE/EPDM
|
|
|
|
20130007VV
|
Servicekit diaphragm valve
Type Veevalve
DN32-40/1.5" EPDM
|
|
|
|
20139904VV
|
Parts diaphragm valve
Top part with manual device
06 size 002 316 Ra
|
|
|
|
20163009IN
|
Servicekit diaphragm valve
Type Veevalve
2"/DN50/2.5"/DN65
Diaphragm gasket no.4 PTFE/EPDM
|
|
|
|
20130011VV
|
Servicekit diaphragm valve
Type Veevalve
DN50/2" EPDM
|
|
|
|
20130113VV
|
Servicekit diaphragm valve
Type Veevalve
DN65-80/2.5"-3" EPDM
|
|
|
|
20139905VV
|
Parts diaphragm valve
Top part with manual device plastic
06 size 002
|
|
|
|
Materials |
|
Parts in contact with product | AISI 316L / 1.4404 |
Other stainless steel parts | AISI 304 / 1.4301 |
Diaphragm | EPDM FDA 177.2600 and USP Class VI |
FPM of VMQ FDA 177.2600 and USP Class VI | |
PTFE / EPDM separate FDA 177.2600 | |
ID finish | Ra < 0.5 µm |
Technical data |
|
Sizes | Inch : ¼” – 2” |
DIN : DN 6-50 | |
Max. temperature | Depends on elastomer |
Max. operating pressure | 10 bar |
Min. Operating pressure | 6 to 8 bar |
Options |
|
Operating | Manually Plastic or stainless steel |
Pneumatically Plastic or stainless steel | |
Diaphragm options | FPM, VMQ (silicon), PTFE/EPDM |
Connections | Weld, DIN, SMS, RJT |
Tank outlet valve | Available |
T valve | NDL (Non dead leg T-valve) |