Inoxpa Innova D
Applying Single Seat Valve
The Inoxpa Innova D-type valve is a pneumatic shut-off single seat valve with two seals that, by means of a leakage chamber under atmospheric pressure formed between the two seals and therefore enables a safe separation of two different products. One of these products is usually CIP (cleaning medium).
Compressed air is simultaneously applied to the actuator and to the leakage valves to prevent leakage through the leakage valve when the valve opens. Valve open - leakage valves closed / valve closed - leakage valves open.
The leakage chamber can be cleaned through one of the two available leakage valves.
Design and features
- Specific profile seat seals, conical upper seal, radial lower seal.
- Main valve with single acting actuator (NC) and normally open leakage valves (NO).
- Easy assembly/disassembly of internal parts by loosening a clamp fastener.
- Open lantern allows visual inspection of shaft sealing.
- 360º adjustable body.
| Articlenr. | Description | Stock |
|---|---|---|
|
33836029IN
|
Dubbelseal valve Inoxpa
Innova type DT, 3 ports
Body DN40 (41,00 x 1,50)
EPDM 1.4404 (316L)
Actuator normally closed
|
|
Materials |
|
| Parts in contact witht the product | AISI 316 |
| Other stainless steel parts | AISI 304 |
| Gasket Inoxpa Innova D | EPDM |
| Internal surface finish | Bright polish, Ra < 0,8 µm |
| External surface finish | Matt |
| Available sizes |
DIN11850: DN25 - DN100 ASME BPE: OD: 1" - OD 4" |
| Connections Inoxpa Innova D | Las |
| Temperature range (EPDM) | -10 °C to +121 °C |
| SIP temperature, max. 30 min. | 140 °C |
| Maximum working pressure | 10 bar |
| Minimum working pressure | Vacuum |
| Compressed air pressure Inoxpa Innova D | 6-8 bar |
Options |
|
| Double-acting pneumatic actuator C-TOP+ control unit External position sensors |
|
| Gaskets | FPM, HNBR |
| Surface finish | Ra ≤ 0,5 μm. |