SPX APV SVS
Butterfly valve Delta SVS Fl/Fl DN25, handle EPDM, 304L
Applying a APV Butterfly Valve SVS
The APV butterfly valve SV(S) is a "basic" open/close valve which comes in multiple configurations by APV and has a large installed base.
APV butterfly valve SV1 Delta, and Delta SVS1F product temperature:
- Max. 150 ° C in EPDM, 135 ° C at Silicon, FKM (Viton) and HNBR
Sterilization temperature:
- 170 ° C in EPDM, 140 ° C at Silicon, FKM (Viton) and HNBR
Air-serve optionally available with:
- Direct Connect Control Unit CU31
- AS-Interface/Asi-Bus Control Unit CU31
- Net Valve/Valve-Net Control Unit CU31
The pneumatic model is fitted with a maintenance-free air cylinder including a guarantee of five years.
EHEDG certified by TNO Nutrition and Food Research UK. Report no. V4634.
| Articlenr. | Description | Dimensions | Material type | Connection | Operating | Stock |
|---|---|---|---|---|---|---|
|
25828104AP
|
APV butterfly valve Delta SVS
Flange / Flange
1" (25,40) 1.4404 (316L)
HNBR
Excluding handle
|
1" (ø 25,4 mm) | 316 (L) | Flange / Flange |
|
|
|
25828108AP
|
APV butterfly valve Delta SVS
Flange / Flange
1.5" (38,10) 1.4404 (316L)
HNBR
Excluding handle
|
1,5" (ø 38,1 mm) | 316 (L) | Flange / Flange |
|
|
|
25828110AP
|
APV butterfly valve Delta SVS
Flange / Flange
2" (50,80) 1.4404 (316L)
HNBR
Excluding handle
|
2" (ø 50,8 mm) | 316 (L) | Flange / Flange |
|
|
|
25828112AP
|
APV butterfly valve Delta SVS
Flange / Flange
2,5" (63,50) 1.4404 (316L)
HNBR
Excluding handle
|
2,5" (ø 63,5 mm) | 316 (L) | Flange / Flange |
|
|
|
25828114AP
|
APV butterfly valve Delta SVS
Flange / Flange
3" (76,10) 1.4404 (316L)
HNBR
Excluding handle
|
3" (ø 76,1 mm) | 316 (L) | Flange / Flange |
|
|
|
25828116AP
|
APV butterfly valve Delta SVS
Flange / Flange
4" (101,60) 1.4404 (316L)
HNBR
Excluding handle
|
4" (ø 101,6 mm) | 316 (L) | Flange / Flange |
|
|
|
25834005AP
|
APV butterfly valve Delta SVS
Flange / Flange
DN25 (29) 1.4307 (304L)
EPDM
Including standard handle
Plastic, stainless steel 304
|
DN25 (ø 29 mm) | 304 (L) | Flange / Flange | Manually operated |
|
|
25834009AP
|
APV butterfly valve Delta SVS
Flange / Flange
DN40 (41) 1.4307 (304L)
EPDM
Including standard handle
Plastic, stainless steel 304
|
DN40 (ø 41 mm) | 304 (L) | Flange / Flange | Pneumaticcaly operated Air open / Spring closed |
|
|
25834011AP
|
APV butterfly valve Delta SVS
Flange / Flange
DN50 (53) 1.4307 (304L)
EPDM
Including standard handle
Plastic, stainless steel 304
|
DN50 (ø 53 mm) | 304 (L) | Flange / Flange | Manually operated |
|
|
25834013AP
|
APV butterfly valve Delta SVS
Flange / Flange
DN65 (70) 1.4307 (304L)
EPDM
Including standard handle
Plastic, stainless steel 304
|
DN65 (ø 70 mm) | 304 (L) | Flange / Flange | Manually operated |
|
|
25834015AP
|
APV butterfly valve Delta SVS
Flange / Flange
DN80 (85) 1.4307 (304L)
EPDM
Including standard handle
Plastic, stainless steel 304
|
DN80 (ø 85 mm) | 304 (L) | Flange / Flange | Manually operated |
|
|
25834016AP
|
APV butterfly valve Delta SVS
Flange / Flange
4" (101,60) 1.4307 (304L)
EPDM
Including standard handle
Plastic, stainless steel 304
|
4" (ø 101,6 mm) | 304 (L) | Flange / Flange | Manually operated |
|
| Articlenr. | Description | Dimension | Elastomer | Stock |
|---|---|---|---|---|
|
27134421AP
|
Butterfly valve part APV
Handle for 1x prox.switch
DN25/1" 304 SV/SVS
|
|
|
|
|
27134423AP
|
Butterfly valve part APV
Handle prox.switch DN80-100/4" 304
|
|
|
|
Material |
|
| Product contact parts | W.St. 1.4301/1.4307 or AISI 304(L) and 1.4404 or AISI 316L |
| ID finish | Ra <0.8 μm |
| Other steel parts | W.St. 1.4301 / AISI 304 |
| Standard seal | EPDM |
| Type of seal (Valve) | T-profile |
| Type of seal (Flanges) | FGN gasket |
| Shaft bearing | Yes, different under and upper |
| Max. working pressure | 10 bar |
| Min. working pressure | 2 bar |
| Max. temperature | Depends on elastomer |
| Sizes | Weld/Weld DN25 - DN150 and 1" - 4" Flange/flange DN25-250 |
| DIN sizes | DN25 – DN250 |
| Inch sizes | Inch : 1” – 4” |
| ISO sizes | |
| Seal options | EPDM, MVQ (Silicon), FKM (Viton), HNBR |
Version |
|
| Connections | Weld, malepart, liner/nut, flange en clamp |
| DIN11851, DIN32676 or ISO2852 | |
| RJT, SMS | |
| Standard operating | Manually operated (two positions) |
| Stepless adjustable | |
| Manually operated with positioners | |
| Pneumatical operating | Double air and air/spring |
| Required air pressure | 6 to 10 bar |
| Status report | Standard with bracket |
| Options | Actuator with positioner |
| Control Unit (ASI/profibus modul) | |
| Open/Close signal (CE) | |
| Lock-out/tag-out manual operated | |
Maintenance |
|
| Revision/dissasembly | Between flange model can be disassembled in line |
| Other models are not | |
| Special tools required | No |
Unique |
|
| Hand-operated | Plastic cover (hygienic and distinctive) |
| Pneumatical-operated | Easy to change NC to NO |