SPX APV Delta M4
Applying the SPX APV Type Delta M4/MP4
SPX APV has a wide range of aseptic valves and switch valves. For example the series Delta M4 and MP4. By using the standard existing leak detection channel, a possible damage to the membrane is to be noted in good time, so that the aseptic function can be restored. The SPX APV single seat valve MP4 has a valve stem which is completely TFM, which enables that this type of valve can also be used in situations where elastomers are not desirable.
All metal parts that come in contact with the product are standard in stainless steel AISI 316L. The SPX APV single seat valves are fitted with EPDM sealing rings, but can also be supplied with FPM (Viton) and HNBR elastomers. All applied elastomers are admitted FDA. The SPX APV single seat valve can be equipped with a Control Unit equipped with solenoid valve and double feedback in Direct Connect, AS-Interface, Device-Net or Profi-Bus.
| Articlenr. | Description | Dimensions | Stock |
|---|---|---|---|
|
33036004AP
|
Aseptic single seat valve Delta M4
Type 41L (12) 1" EPDM 316L
|
1" (ø 25,4 mm) |
|
| Articlenr. | Description | Dimension | Elastomer | Stock |
|---|---|---|---|---|
|
33030916AP
|
Spare part set Delta M31
4" EPDM
|
|
|
|
|
33030412AP
|
Servicekit single seat
membrane valve M4/MT4
2.5"/NW65 EPDM
|
|
|
|
|
33030404AP
|
Spare part set Delta M4-MP4
1" EPDM
|
|
|
|
|
33030415AP
|
Servicekit single seat
membrane valve M4/MT4
NW80 EPDM
|
|
|
|
|
33030405AP
|
Servicekit single seat
membrane valve M4/MT4
1"/NW25 EPDM
|
|
|
|
|
33020413AP
|
Spare part set Delta M4-MP4
DN65 HNBR
|
|
|
|
|
33030411AP
|
Spare part set Delta M4-MP4
DN50 EPDM
|
|
|
|
|
33020404AP
|
Spare part set Delta M4-MP4
1" HNBR
|
|
|
|
|
33020417AP
|
Servicekit single seat
membrane valve M4/MT4
4"/NW100 HNBR
|
|
|
|
|
33020410AP
|
Servicekit single seat
membrane valve M4/MT4
2"/NW50 HNBR
|
|
|
|
|
33030408AP
|
Servicekit single seat
membrane valve M4/MT4
1,5"/NW40 EPDM
|
|
|
|
|
33030409AP
|
Spare part set Delta M4-MP4
DN40 EPDM
|
|
|
|
Material |
|
| Product contact parts | 316 L 1.4404 |
| ID finish | 0,8 μm |
| Other stainless steel parts | 304 / 1.4301 |
| Standard seals | EPDM |
| Max. operating pressure | 5 bar |
| Sizes | DN25 – DN100 / 1” – 4” |
| Seal options | PFM (Viton) or HNBR |
| Max. temperature | Depends on elastomer |
| Actuator | 1.4301 |
| Membrane | TFM / EPDM |
| Option: membrane shaft M4 TFM | |
Actuator |
|
| Required air pressure | 6 – 8 bar |
| Spring closed or spring open | |
| Intergrated lift | |
Working principle |
|
| Closed position valve | Standard |
| Valve seal | - |
| Visual leak detection | - |
| Cleanable leak room | - |
| Cleanable upper valve | - |
| Cleanable lower valve | - |
| Mix proof switching | - |
| Balanced valves | - |
Maintenance |
|
| House connection | - |
| Revision/disassembly | - |
| Special tools necessary | Yes, for the seals |